.Flame    ATmaP    Static Control    Plasma    Corona    Robotics            Surface Treatment Engineers 

 

Home
Up

Contact Information:

Tel:  +44 (0) 1543 411460
Fax: +44 (0) 1543 415140
Post: Dyne Technology Ltd
         Unit 1, The Oak Tree
         Elmhurst Business Park
         Lichfield
         Staffordshire,
         WS13 8EX
         United Kingdom.
 
E-mail   
info@dynetechnology.co.uk
 
Web Site:
www.dynetechnology.co.uk

 

SILICONE SLEEVES - CORONA TREATERS

  

Dyne Technology Ltd, supply a wide range of Silicone rubber corona treater sleeves ranging in diameters from 50mm to 200mm and in a selection of wall thicknesses to suit your corona treatment unit. Our range of silicone sleeves are designed to give a high level of electrical, chemical and thermal resistance, a detailed specification is set out below. To order new silicone sleeve (see specification below) for your corona treatment unit simply give us the following information:

    - Treater sleeve inside diameter in mm

    - Treater sleeve wall thickness in mm

    - Treater sleeve length in mm

......and we will do the rest.

Enquire about silicone treater sleeves for your corona treatment unit, click here: Enquiry

To order silicone treater sleeves for your corona treatment unit, click here:         Order

 

Or telephone us on +44 (0) 1827 284244

Silicone Treater Sleeve - Physical Properties 

Test

Range

Test Standard

Hardness

60 – 70 Shore A

ASTM D2240

Specific Gravity

1.16 - 1.24 g/cm³

Electronic analysis

Tensile Strength

6.0 N/mm² Minimum

BS 903/A2

Elongation

250 % Minimum

BS 903/A2

Tear Strength

15.0 kN/m Minimum

BS 903/A3

Temperature Range

-50 up to 200°C

 

Compression Set

% tba

BS 903/A6

Colour

Any

 

Dielectric Strength

20 kV/mm

 

Volume Resistivity

1015 Ohm/cm

 

Dielectric Constant

2.9 - 3.2

 

Power Factor

0.003

 

 Cure Conditions

Physical properties are measured using a 2.5mm test sheet (6.0mm for hardness), cured under the following conditions: - 5 minutes press cure @ 116+/-5°C.    No post cure

 

Related pages:

<<Corona treatment of Labels & Web>>

<<Label Treater>>

<<Web Treater >>

>> Dyne Home Page

 

Contact Information:

Phone:    +44 (0) 1543 411460
Fax:        +44 (0) 1543 415140
Post:        Dyne Technology Ltd, Unit 1, The Oak Tree, Elmhurst Business Park, Lichfield, Staffordshire, WS13 8EX, United Kingdom.
E-mail     info@dynetechnology.co.uk

[Home] [Up]

Copyright © 2005 - 2008 Dyne Technology Ltd - All rights reserved.   -   Web Site Design by 2 Stars   -   Last modified: 06/30/08