.Flame    ATmaP    Static Control    Plasma    Corona    Robotics            Surface Treatment Engineers 

Contact Information:

Tel:  +44 (0) 1543 308670

Fax: +44 (0) 1543 308672

Post: Dyne Technology Ltd

    Unit 16,

    Lichfield Business Village

    The Friary

    Lichfield

    Staffs,

    U.K.

    WS13 6QG

 

E-mail   

info@dynetechnology.co.uk

 

Web Site:

www.dynetechnology.co.uk

ATMOSPHERIC PLASMA TREATMENT:

The purpose of plasma surface treating of polymer-based materials is to increase surface wettability through electrical plasma discharge.

The low surface energy of polymer-based substrates often leads to poor adhesion of inks, glues and coatings. To obtain optimum adhesion, it is necessary to increase the surface energy of the substrate to just above that of the material to be applied. Surface Treatment with plasma results in good wetting of the material over the surface of the substrate and so improves adhesion. Plasma technology offers innovative solutions to adhesion or wetting problems in many industries. Component preparation is an important step prior to soldering, bonding, painting, varnishing or coating processes. Plasma treatment provides an economical solution for the cleaning and activation of component surfaces before further processing. Dyne Technology offers the Tantec developed PlasmaTEC. Powered by one generator and one transformer, the PlasmaTEC generates plasma and uses air pressure to blow it through a nozzle.

 >> Dyne Home Page

Contact Information:

Phone:    +44 (0) 1543 308670

Fax:        +44 (0) 1543 308672

Post:        Dyne Technology Ltd, Unit 16, Lichfield Business Village, The Friary, Lichfield, Staffs, WS13 6QG, United Kingdom.

E-mail     info@dynetechnology.co.uk

[Home] [Up]

Copyright © 2005 - 2007 Dyne Technology Ltd - All rights reserved.   -   Web Site Design by 2 Stars   -   Last modified: 07/27/07