Narrow Web and Label Corona Surface Treatment Equipment

  • Corona treatment of narrow web & label
  • Narrow web & label printer

The purpose of corona surface treatment of polymer based materials is to increase surface wettability through electrical discharge. The low surface energy of polymer based substrates often leads to poor adhesion of inks, glues and coatings. To obtain optimum adhesion it is necessary to increase the surface energy of the substrate to just above that of the material to be applied. Surface treatment with corona results in good wetting of the material over the surface of the substrate and so improves adhesion.

Our narrow web and label corona treating systems can be supplied to treat either one or both sides of the web and can accommodate widths from 10 to 500mm running at production speeds of up to 150m/min. The narrow web corona treater is designed for the pre-treatment of conductive and non-conductive narrow webs.

Advantages
•    Compact design & construction.
•    Easily fitted to new or existing production lines or presses.
•    Ceramic electrode elements for uniform surface treatment.
•    Good accessibility for initial web thread-up.
•    Interchangeable electrode system.
•    Available for single and double sided treatment.
•    Idler rollers included.
•    Stainless steel backing roller.
•    All units conform to CE regulations and carry CE mark.
•    Standard mountings available for a wide range of narrow web presses.

Our very compact narrow web treater combines simple operation with superb performance. The high voltage transformer is mounted directly on to the treating station, completely removing the need for trailing high voltage cables.
•    Treatment widths from 100mm to 500mm.
•    Electrode systems for either conductive or non-conductive materials.
•    Single or double side treatment in a single pass.
•    Run from standard 240Volt,13Amp socket outlet.

For further information on the Narrow Web & Label Corona Treater download the pdf below.

Click to read our eBooks: Web and Label Treating

Our technical support team will be delighted to conduct a no obligation, free of charge process evaluation on your products. Simply send us a sample of your parts and we will evaluate the available surface treatment technologies and return treated parts to you for evaluation.

Please contact us to find out how Dyne Technology can help you or to request a quote.

Clients using Dyne Technology